|Place of Origin:||Guangdong, China|
|Brand Name:||Smart Laffey|
Payment & Shipping Terms:
|Minimum Order Quantity:||50 Pieces|
|Packaging Details:||Carton Box|
|Delivery Time:||10-15 work days|
|Supply Ability:||20000 Piece/Pieces per Month|
|Protocol:||RS485 Modbus||Application Scene:||Smart Home|
|Function:||Controlling Indoor Temperature||Size:||86mm*86mm|
|Power:||12V, DC||Back Box For Installation:||UK|
modbus thermostat control panel,
RS485 thermostat control panel,
4 Conjoined control panel thermostat
RS485 Smart Home Thermostat Controlling Indoor Temperature Panel
|Product Name||HA6 thermostat of modbus|
|Back Box for Installation||UK Square Box|
1) Cooling/heating/air three mode setting
2) Airflow high/mid/low/auto setting
|Application||Connecting room control unit|
1. The HA6 series is an upgraded version of the G platform product. The width of the outer frame is narrowed to make the switch module larger, but the socket is still a functional module shared with the G platform. A 0.6mm wide plastic inner frame is added between the functional module and the outer frame to match other products in this series.
2. Horizontally mounted conjoined frame are avaliable: 2/3/4 conjoined frame.
3. Standard 86 wall box installation, multiple panels can connect seamlessly.
The network intelligent panel reads and modifies the internal registers through 485 communication to achieve remote monitoring and output control. The communication protocol adopts the standard MODBUS RTU communication protocol. Serial port settings: baud rate "9600", parity bit "none", data bit "8", stop bit "1". The two commands are separated by 100ms. If the instruction is not read within 2 seconds, it will be cleared, and if it is read, it will be cleared immediately. Reading time interval: greater than 20ms.
1. Thermostat on and off control;
2. Indoor temperature setting/indoor temperature measurement;
3. The fan speed can be selected as one of "high/medium/low/auto";
4. Air conditioning (refrigeration, heating, ventilation), floor heating, fresh air three modes can be switched;
5. With the function of manual temperature correction, manually restore the factory default values of the thermostat parameters, and manually set the thermostat communication address.
1. Power on/off status display: the entire screen is not displayed when it is turned off, and the switch button indicator light is always on;
2. Temperature display: indoor temperature, temperature setting value;
3. Mode display: only one of air conditioning, floor heating, and fresh air will be displayed;
4. Wind speed display: high, medium, low, automatic sub-level display;
5. In the shutdown state, enter the temperature correction value display through the key combination, restore the factory default value setting display and address setting of the thermostat parameter.
1. When the thermostat is turned on, there is no operation within 3 minutes, the screen is black and does not display, the button indicator is in a glimmer state; When there is a button action, the screen resumes to light, and the button indicator is in a highlighted state.
2. After the thermostat is turned off, only the switch button indicator is in the glimmer state, and the other button indicators are all off. When there is a button action, all the button indicators are in the highlighted state. There is no button operation within 3 minutes, the indicator is off.
3. On/Off button:
①For products only with air conditioner or floor heating or fresh air, press this button to turn off the thermostat. Press again to turn on it.
②For two-in-one and three-in-one products, in any interface, press and hold the key for 5 seconds to turn off the thermostat, and press the key again to turn on the thermostat. In the air conditioner interface, press this key to turn on or off the air conditioner; In the floor heating interface, press this key to turn on or off the floor heating; in the fresh air interface, press this key to turn on or off the fresh air.
4. Mode key: In the air conditioning interface, press this key to switchover between cooling, heating and ventilation modes, and it will work only in the air conditioning interface;
5. Function Key: Press this button to switchover between air conditioning, fresh air and floor heating interface.
6. Fan speed key: Adjust the fan speed when in the air conditioning or fresh air interface;
7. △/▽ Key: Adjust the set temperature value when in the air conditioning or floor heating interface;
8. Icon: When the air conditioning, floor heating, or fresh air are turned on, it will display “ON”, and when it is turned off, it will display “OF” off;
9. Fresh air intake and ventilation icons: It will be on and off at the same time, divided into 2 or 3 gears, in the fresh air interface, you can use the combination key to configure whether the fan speed is 2 gears (only connect H and M) or 3 gears ( Connect to HML).
(1) Mutual benefit : We are factory also have more than 10 years experience in manufacturing and developing of switches and sockets.
(2) Customize : We have strong R&D team, we will try our best to custom product as your request.
(3) OEM service : (a) Printing your Logo (b) Engraving words or icons
(4) Mix order : We accept mix order, different model and small quantity order.
1. Q:What’s the shipping method?
A: By express way. Such as Fedex, DHL, TNT and so on; by air or by sea. Shipping cost is decided by shipping ways and product’s actual weight and volume, also your detailed address.
2. Q:Can we print our own brand or logo on your products?
A: Yes, it is our pleasure to be one your OEM manufacturer in China to meet your OEM requirements.
3. Q: Why do some goods have difference between website picture and practical items?
A: Because difference of light and browser, also different batches, materials may be little difference, such as lining. Sometimes, the picture is for reference only. These are allowed in actual case. If any question, please tell us before order and ask clearly.
4. Q: Can I order one piece for sample or trial order less than MOQ to test the quality?
A: Yes, We recommend to check the sample before order. We accept trial order less than MOQ.
5. Q: If I order big quantity, what's the good price?
A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.
If you have another question, please feel free to contact us.
Enter Your Message